Table of Contents
Advertisement
D
S
EVICE
ETUP
Inside the Shipping Carton
CAUTION
Personal Security
Considerations
Electrical
Considerations
Contactless
Considerations
CAUTION
Inside the
Shipping Carton
Unpacking the
Shipping Carton
12
235 I
E
NSTALLATION
•
Do not use the device outdoors.
The device is not waterproof or dustproof and is intended for indoor use only. Any
damage to the unit from exposure to rain or dust may void any warranty.
The e235 is a handover device. Always exercise extreme caution when
conducting transactions, especially during PIN entry.
•
Hand over the e235 device directly to the cardholder for PIN entry.
•
Encourage the cardholder to hold the e235 device closer to avoid others from
seeing the information entered.
•
Avoid using this product during electrical storms.
•
Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
•
Do not use the terminal near water or in moist conditions.
•
Disconnect the device from its POS terminal before cleaning.
Avoid having metallic objects in the proximity of a contactless antenna. If you need
to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic
mounting plate.
The device is not waterproof or dustproof and is intended for indoor use only. Any
damage to the unit from exposure to rain or dust may void any warranty.
Using an enclosed metal frame or mount may negatively affect contactless
performance.
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The e235 is a secure product and any tampering may cause
the device to cease to function properly.
To unpack the shipping carton:
1
Remove and inspect the contents of the shipping carton. The terminal ships in
multiple configurations. The carton may include all or any of the following:
•
Terminal
•
Connectivity cable
2
Remove all plastic wrapping from the terminal and components.
3
Remove the clear protective film from the display.
G
UIDE
Advertisement
Table of Contents
