Equipment/Products; Main Panel Hardware - Fike SHP 10-051 Product Manual

FIKE CORPORATION
3.0

EQUIPMENT/PRODUCTS

3.1

MAIN PANEL HARDWARE

The 10-051 SHP control panel consists of a red (or gray) metal enclosure with removable door for ease of
mounting flush or surface. The back-box is 21" high x 14.35 " wide x 4 " deep. It also includes a 0.5" lip
around the back box to facilitate flush mounting. Refer to Section 3.7 for a complete detail of the back-
box dimensions.
The basic part numbers for the components covered in further detail in this section are as follows:
Part Number
10-051-c-p
10-2171
10-2172
10-2176
10-2190-b
10-051 SHP Control System
•
Includes the main controller with transformer and AC terminal
block inside steel enclosure (red or gray). The enclosure
door is equipped with a standard Fike keylock and a viewing
window covered with clear lexan. The enclosure includes
space for installing batteries (up to 18 AH – ordered
separately).
•
10-2171 SHP Controller
The controller is the heart of the SHP control panel. It contains
the system's central processing unit, power supply, and other
primary components. It also includes the electronics required to
support the optional Class A module and SRM4 Relay module.
UL S2203
FM 0Z8A0.AY
Description
SHP Control System
c: (R = red, G = gray)
p: (1 = 120VAC, 2 = 208 or 240VAC)
SHP Controller Printed Circuit Board
Class A Input Module
SRM4 Relay Module
Battery Assembly AH selection
b: (1 = 7 AH, 2 = 18 AH)
SHP Product Manual
Manual P/N: 06-130
firealarmresources.com
EQUIPMENT
Page 9 of 43
Rev. No. 3, 04/02