Connecting Your Phone; Installing The Phone Battery - Cisco Unified Wireless IP Phone 7925G Quick Reference

Connecting Your Phone

Your system administrator will configure your new Cisco Unified Wireless IP Phone to connect to the
corporate wireless network and the IP telephony network.
A rechargeable Lithium ion battery powers the Cisco Unified Wireless IP Phone 7925G. Before you
can use your phone, you must install the battery in the phone and then charge the battery. Depending
on the type of battery you have, the fully charged battery provides these hours of service:
• The standard battery provides up to 9.5 hours of talk time or up to 180 hours of standby time.
• The extended battery provides up to 13 hours of talk time or up to 240 hours of standby time.
Using a Bluetooth wireless headset reduces the talk time and standby time for both types of
Note
batteries. In addition, how the system administrator configures your phone also affects its
battery life. For more information, see your system administrator.

Installing the Phone Battery

This section describes how to install the phone battery. Use the following graphics to do the following:
1. Remove the phone cover
2. Install the battery
3. Replace the cover
Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0
Connecting Your Phone
7