Basic Call Handling; Placing A Call-Basic Options - Cisco Unified Wireless IP Phone 7925G Quick Reference

Basic Call Handling

You can perform basic call-handling tasks using a range of features and services. Feature availability
can vary; see your system administrator for more information.
Placing a Call—Basic Options
Here are some easy ways to place a call on your wireless IP phone.
Your system administrator can configure your phone to alert you (by beeping) when it is out
Note
of range of the wireless network. You can only use your phone if it is within range of the
wireless network. For more information, see your system administrator.
If you want to...
Place a call using the
handset
Place a call using the
speaker mode on the
handset
Redial a number using the
handset
Redial a number using your
Bluetooth wireless headset
Place a call while another
call is active (using the same
line)
Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0
Then...
1. Dial the phone number.
2. Press to place your call.
Note No dial tone occurs.
1. Press and hold
speaker.
2. Dial the phone number.
3. Press to place your call.
Note Press and hold
off speaker mode.
Press twice or choose Options > Redial.
See the documentation from your headset
manufacturer.
1. Choose Hold.
2. Choose Options > NewCall.
3. Dial, redial, or speed dial a number.
You hear dial tone with NewCall.
Note
button to activate the
button again to turn
Basic Call Handling
For more information,
see...
Answering a Call,
page 37
Using a Handset,
Headset, and
Speakerphone,
page 65
Using Hold and
Resume, page 39
33