Using Phone Buttons; Understanding Lines Vs. Calls - Cisco Unified Wireless IP Phone 7925G Quick Reference

Using Phone Buttons

The phone keypad and buttons provide these shortcuts to frequently used functions.
If you want to... Then...
Lock the phone Press and hold the
keypad "Keypad Locked" and the
the Main screen.
Note
Unlock the Press Unlock. When the screen displays "Unlock Keypad?",
phone keypad press OK, and the
Note
Toggle between Press and hold
ring and vibrate
mode "Vibrate On!" and the
To switch back to the ring mode, press and hold
the screen displays "Vibrate Off!" and the
disappears.
Note
Listen to voice Press and hold the
messages voice messaging system.
Adjust the Press
volume during a
call
Change the ring When the phone is idle, press
pattern for your vibrate, or silent mode.
calls

Understanding Lines vs. Calls

To avoid confusion about lines and calls, refer to these descriptions:
• Lines—Each corresponds to a directory number or intercom number that others can use to call
you. Your phone supports up to six lines. To see your phone lines, press
View. You have as many lines as you have directory numbers with phone line icons
View list.
28
key until the screen displays
The keypad lock is temporarily disabled when you have
an incoming call.
icon disappears.
You must press the Unlock and OK softkeys when they
appear, or the keypad remains locked.
until the screen displays
icon appears at the top.
You can also use the Volume button to set the vibrate
mode.
until the phone connects to your
for a call on the handset, speaker, or headset.
icon displays at the top of
icon
to set the ring volume,
For more
information, see...
Setting the Keypad
to Automatically
Lock, page 75
Customizing Rings,
page 70
until
Accessing Voice
Messages, page 87
Using Phone
Buttons, page 28
Customizing Rings,
page 70
to open Line
in the Line
OL-16132-01