Understanding Barge Features; Using Barge Features - Cisco Unified Wireless IP Phone 7925G Quick Reference

Understanding Barge Features

cBarge and Barge
Depending on how your phone is configured, you can add yourself to a non-private call on a shared
line using either Barge or cBarge.
• cBarge converts the call into a standard conference, allowing you to add new participants. (See
Making Conference Calls, page 45
• Barge allows you to add yourself to the call but does not convert the call into a conference or allow
you to add new participants.

Using Barge Features

The table below describes how to use barge features (cBarge or Barge) to add yourself to a call on a
shared line.
If you want to...
See if the shared line is
in use
Add yourself to a call
on a shared line
View conference
participants
Leave a barged call
Tips
• When you barge a call, other parties hear a beep tone announcing your presence. With cBarge,
other parties hear a brief audio interruption and the phone screen changes to display conference
details.
• If a phone that is using the shared line has Privacy enabled, call information and barge softkeys
will not appear on the other phones that share the line.
• You will be disconnected from a call that you have joined using Barge if the call is put on hold,
transferred, or turned into a conference call.
58
for more information about standard conferences.)
Then...
Look for the icon and the "In Use Remote" message.
1. Highlight a remote-in-use call. You might need to use Line View.
2. Choose Options > Barge or cBarge.
See Viewing or Removing Conference Participants, page
Choose EndCall or
If you disconnect after using Barge, the remaining parties hear a disconnect
tone and the original call continues.
If you disconnect after using cBarge, the call remains a conference call
(provided at least three participants remain on the line).
.
49.
OL-16132-01