Logging Out Of Hunt Groups - Cisco Unified Wireless IP Phone 7925G Quick Reference

If you want to...
Store an active call
using Call Park
Retrieve a parked call
Direct and store an
active call at a directed
call park number
Retrieve a parked call
from a directed call
park number
Tip
You have a limited time to retrieve a parked call before it reverts to ringing at the original number. See
your system administrator for details.

Logging Out of Hunt Groups

If your organization receives a large number of incoming calls, you might be a member of a hunt group.
A hunt group includes a series of directory numbers that share the incoming call load. When the first
directory number in the hunt group is busy, the system hunts for the next available directory number
in the group and directs the call to that phone. When you are away from your phone, you can prevent
hunt group calls from ringing your phone by logging out of hunt groups.
If you want to...
Log out of hunt groups to temporarily
block hunt group calls
Log in to receive hunt group calls
Tip
Logging out of hunt groups does not prevent non-hunt group calls from ringing your phone.
56
Then...
1. During a call, choose Options > Park.
2. Note the call park number that appears on your phone screen.
3. Press .
Enter the call park number from any Cisco Unified IP Phone in your
network to connect to the call.
1. During a call, press Transfer.
2. Choose a speed-dial number with a park-unoccupied icon
speed dial the directed call park number.
A speed-dial number with park-occupied icon
directed call park number is not available.
Note If BLF is not configured for the speed-dial number, the icon will not
show whether the directed call park number is available or not.
3. Press Transfer again to finish storing the call.
From any Cisco Unified IP Phone in your network, enter the park retrieval
prefix and dial the directed call park number.
Then...
Choose Options > HLog. Your phone screen displays,
"Logged out of Hunt Group."
Choose Options > HLog.
to
indicates the
OL-16132-01