Understanding Out-Of-Range Alerts - Cisco Unified Wireless IP Phone 7925G Quick Reference

Icon Line or call state
BLF-monitored line is
idle
BLF-monitored line is
in-use
BLF-monitored line is
in Do Not Disturb state
BLF indicator is
unavailable for this line
Remote line in use
Call on hold
Call forward enabled
Authenticated call
Encrypted call
Idle Intercom line
One-way Intercom call The intercom line is sending or receiving one-way audio. See
Two-way Intercom call The recipient pressed the intercom line to activate two-way

Understanding Out-of-Range Alerts

Your system administrator can configure your phone to send you an audible alert (beep) when you are
out of range of the wireless network. When you hear the alert, the
displayed on the phone screen.
When you are out of range of the wireless network, you will not be able to use the phone for features
requiring a wireless network connection, such as making and receiving calls.
If your system administrator enabled the out-of-range alert, depending on the configuration, you
might hear a beep only once, or every 10, 30, or 60 seconds until you are back within range of the
wireless network.
30
Description
See Using BLF to Determine a Line State, page
See Using BLF to Determine a Line State, page
See Using BLF to Determine a Line State, page
See Using BLF to Determine a Line State, page
A shared line is in use remotely. See
page 57.
You have put this call on hold. See
page 39.
You have forwarded your primary line. See
to Another Number, page
See Tracing Suspicious Calls, page
See Tracing Suspicious Calls, page
The intercom line is not in use. See
Intercom Calls, page
Placing or Receiving Intercom Calls, page
audio with the caller. See
Calls, page 50.
Using a Shared Line,
Using Hold and Resume,
43.
62.
62.
Placing or Receiving
50.
Placing or Receiving Intercom
(no signal) icon will be
59.
59.
59.
59.
Forwarding Calls
50.
OL-16132-01