Doosan D20S-5 Operation & Maintenance Manual page 21

Weight adjustment Weight adjustment
Pull the weight adjustment lever upwards and move Pull the weight adjustment lever upwards a
right or left side. right or left side.
Adjust to driver's weight in 7 steps (50 ~ 110 kg) Adjust to driver's weight in 7 steps (50
Do not place your hand or fingers under the seat. Do not place your hand or fingers under the seat.
Injury may occur as the seat moves up and down. Injury may occur as the seat moves up and
Backrest Inclination Backrest Inclination
The backrest angle can be adjusted by using the The backrest angle can be adjusted by using the
lever on the left side of seat. lever on the left side o
nd move
~ 110 kg)
NOTICE NOTICE
down.
f seat.
Seat Belt Seat Belt
The Operator Restraint System, Prevents the The Operator Restraint System, Prevents the
operator operator from from jumping jumping
compartment in the event of a forward or side compartment in the event of a forward or side
tipover. The system is designed to keep the tipover. The system is designed to keep the
operator on the seat and in the operator's operator on the seat and in the operator's
compartment in the event of a tipover. compartment in the event of a tipover.
Inspection Inspection
1. 1. If the seat belt is torn, if pulling motion is If the seat belt is torn, if pulling motion is
interrupted during extension of the belt, or if the interrupted during extension of the belt, or if the
belt cannot be inserted into the buckle properly, belt cannot be inserted into the buckle properly,
replace the seat belt assembly. replace the seat bel
2. 2. Belt Maintenance - Every 500 service hours. Belt Maintenance - Every 500 service hours.
Check that the belt fastening works properly Check that the belt fastening works properly
and that winding device is free from run lock and that winding device is free from run lock
when jerked. Check that the belt is suitably when jerked. Check that the belt is suitably
fastened to the seat. Check that the seat is fastened to the seat. Check that the seat is
correctly secured to the hood and the chassis. correctly secured to the hood and the chassis.
On visual inspection, fastenings must be intact, On visual inspection, fastenings must be intact,
otherwise, contact the safety manager. otherwise, contact the safety manager.
Your DOOSAN truck comes equipped with a Your DOOSAN truck comes equipped with a
DOOSAN operator restraint system. Should it DOOSAN operator restraint system. Should it
become necessary to replace the seat for any become necessary to replace the seat for any
reason, it should only be replaced with another reason, it should only be replaced with another
DOOSAN operator restraint system. DOOSAN operator restraint system.
-19- -19-
Safety Section Safety Section
from from the the operator's operator's
t assembly.
WARNING WARNING