Doosan D20S-5 Operation & Maintenance Manual page 11

Parking brake Parking brake
Pull the lever BACK to engage the Pull the lever BACK to engage the
parking brake. parking brake.
Push the lever FORWARD to release Push the lever FORWARD to release
the parking brake. the parking brake.
Applying the parking brake puts the transmission in Applying the parking brake puts the transmission in
NEUTRAL. The parking brake must be applied NEUTRAL. The parking brake must be applied
when leaving the lift truck and when starting the when leaving the lift truck and when starting the
engine. If the operator leaves the seat without engine. If the operator leaves the seat without
applying the parking brake, an audible alarm will applying the parking brake, an audible alarm will
sound. sound.
When leaving machine apply parking brake! When leaving machine apply parking brake!
Parking brake is Parking brake is not automatically applied.
Alarm will sound if parking brake is not applied. Alarm will sound if parking brake is
Correct adjustment is necessary to provide Correct adjustment is necessary to provide
adequate braking. See the MAINTENANCE adequate braking. See the MAINTENANCE
section for adjustment procedures. The lift section for adjustment procedures. The lift
truck may creep at engine idle and can cause truck may creep at engine idle and can cause
damage, injury or death. Always apply the damage, injury or death. Always apply the
parking brake when leaving the lift truck. The parking brake when leaving the lift truck. The
parking brake is NOT automatically applied. parking brake is
WARNING WARNING
not automatically applied.
not applied.
WARNING WARNING
NOT automatically applied.
-9- -9-
Safety Section Safety Section