Doosan D20S-5 Operation & Maintenance Manual page 130

Operation Section Operation Section
Transportation Hints Transportation Hints
Lift Truck Shipping Lift Truck Shipping
Check travel route for overpass clearances. Make Check travel route for overpass clearances. Make
sure there is adequate clearance if the lift truck sure there is adequate clearance if the lift truck
being transported is equipped with a high mast, being transported is equipped with a high mast,
overhead guard or cab. overhead guard or cab.
To prevent the lift truck from slipping while loading, To prevent the lift truck from slipping while loading,
or shifting in transit, remove ice, snow or other or shifting in transit, remove ice, snow or other
slippery material from the loading dock and the slippery material from the loading dock and the
truck bed before loading. truck bed before l
Obey all state and local laws governing the height, Obey all state and local laws governing the height,
weight, width and length of a load. weight, width and length of a load.
Observe all regulations governing wide loads. Observe all regulations governing wide loads.
Remove ice, snow or other slippery material from Remove ice, snow or other slippery material from
the shipping vehicle and the loading dock. the shipping vehicle and the l
Always block the trailer or the rail car wheels b Always block the trailer or the rail car
loading the lift truck. loading the lift truck.
Position the lift truck on the truck bed or the rail car. Position the lift truck on the truck bed or
Apply the parking brake and place the transmission Apply the parking brake and place the transmission
control in control in NEUTRAL. NEUTRAL.
Tilt the mast forward and lower forks to the floor. Tilt the mast forward and lower forks to the
Turn the ignition switch to the OFF position and Turn the ignition switch to the OFF position and
remove the key. If LP equipped, shut off the LP fuel remove the key. If LP equipped, shut off the LP fuel
tank. tank.
Block the wheels and secure the lift truck with Block the wheels and secure the lift truck with
tiedowns. tiedowns.
oading.
NOTICE NOTICE
NOTICE NOTICE
oading dock.
wheels before
the rail car.
-127- -127-
Machine Lifting and Tiedown Machine Lifting and Tiedown
Information Information
Improper lifting or tiedowns can allow load to shift Improper lifting or tiedowns can allow load to shift
and cause injury and/or damage. and cause injury and/or da
1. 1. Weight and instructions given herein apply to lift Weight and instructions given herein apply to lift
trucks as trucks as manufactured by DOOSAN.
2. 2. Use proper rated cables and slings for lifting. Use proper rated cables and slings for lifting.
Position the crane for level lift truck lift. Position the crane for level lift truck lift.
3. 3. Spreader bar widths should be sufficient to Spreader bar widths should be sufficient to
prevent contact with the lift truck. prevent contact with the lift truck.
4. 4. Use the tiedown locations provided for lift truck Use the tiedown locations provided for lift truck
tiedown. tiedown.
Check the state and local laws governing weight, Check the state and local laws governing weight,
width and length of a load. width and length of a load.
Contact your DOOSAN Lift Truck dealer for Contact your DOOSAN Lift Truck dealer for
shipping instructions for your lift truck. shipping instructions for your lift truck.
efore
floor.
NOTICE NOTICE
mage.
manufactured by DOOSAN.