Doosan D20S-5 Operation & Maintenance Manual page 127

Lift trucks
Table of Contents

Advertisement

   
Parking the Lift Truck
Parking the Lift Truck
NOTE:     Park the lift truck level with the for
NOTE:
Park the lift truck level with the fork lowered
and the mast tilted forward until the fork
and the mast tilted forward until the fork
touches the floor. Block the drive wheels
touches the floor. Block the drive wheels
when parking on an incline.
when parking on an incline.
1. 1. Park in an authorized area only. Do not block
Park in an authorized area only. Do not block
traffic. If LP equipped, do not park near elevator
traffic. If LP equipped, do not park near elevator
shafts or any other area where LP could collect
shafts or any other area where LP could collect
in a pocket (low area), causing a potentially
in a pocket (low area), causing a potentially
dangerous condition.
dangerous condition.
2. 2. Place the transmission controls in
Place the transmission controls in NEUTRAL.
3. 3. Engage the parking brake.
Engage the parking brake.
4. 4. Tilt the mast forward and lower the fork to the
Tilt the mast forward and lower the fork to the
ground.
ground.
Blocking the wheels will prevent unexpected lift
Blocking the wheels will prevent unexpected lift
truck movement, which could cause personal
truck movement, which could cause personal
injury.
injury.
k lowered
NEUTRAL.
WARNING
WARNING
-124-
-124-
5. 5. Turn the key in the ignition switch to the OFF
Turn the key in the ignition switch to the OFF
position and remove the key.
position and remove the key.
NOTE: If a LP equipped lift truck is stopped or
NOTE:
If a LP equipped lift truck is stopped or
parked for an indefinite or prolonged
parked for an indefinite or prolonged
period of time, shut off the LP fuel tank
period of time, shut off the LP fuel tank
valve.
valve.
6. 6. Actuate each loading lever several times to
Actuate each loading lever several times to
remove the residual pressure in the respective
remove the residual pressure in the respective
cylinders and hoses.
cylinders and hoses.
If Parking Brake Alarm Equipped
If Parking Brake Alarm Equipped
When leaving machine apply parking brake!
When leaving machine apply parking brake!
Parking brake is not automatically applied.
Parking brake is not automatically applied.
Alarm will sound if parking brake is
Alarm will sound if parking brake is not applied.
Operation Section
Operation Section
WARNING
WARNING
not applied.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents