Doosan D20S-5 Operation & Maintenance Manual page 128

Operation Section Operation Section
Lift Fork Adjustment Lift Fork Adjustment
When adjusting the fork spread, be careful not When adjusting the fork spread, be careful not
to pinch your hand between forks and the to pinch your hand between forks and the
carriage slot. carriage slot.
Hook-on type Fork Hook-on type Fork
1. 1. Move up the hook pin to the Move up the hook pin to the free position.
2. 2. Raise the hook pin in each fork to side the fork Raise the hook pin in each fork to side the fork
on the carriage bar. on the carriage bar.
3. 3. Adjust the forks in the posi Adjust the forks in the position most appropriate
for the load and as wide as possible for load for the load and as wide as possible for load
stability. stability.
4. 4. When adjusting the forks, make sure that the When adjusting the forks, make sure that the
weight of the load is cente weight of the load is centered on the truck.
5. 5. After adjustment, set the fork locks to keep the After adjustment, set the fork locks to keep the
forks in place. forks in place.
Make sure the forks are locked before carrying Make sure the forks are locked before carrying
a load. a load.
WARNING WARNING
free position.
tion most appropriate
red on the truck.
WARNING WARNING
-125- -125-