Table of Contents
Advertisement
SPECIFICATION
Code
Model
Rating
Power
Blade Dia/Bore
Blade Tilt
Max Depth of Cut @ 45˚
Max Depth of Cut @ 90˚
Max Width of Cut with Fence
Table Size
Table Height
Table Size With Extensions
Dust Extraction Outlet
Min Extraction Airflow Required
Overall L x W x H
Weight
ASSEMBLY
107712-107713 Basic Saw
WARNING! THE SAW IS HEAVY SEEK
ASSISTANCE BEFORE LIFTING.
NOTE: If either sand or cabinet has been purchased,
assemble them first, see page 12-13.Then mount the stand
to the saw before moving the saw and standing it upright.
1. With assistance lift the saw assembly (A) from the box
onto a suitable work surface. loosen the two grub screws on
the operating wheels (D) and side each wheel onto the shafts.
Nip-up grub screws to securing in place, see fig 01-02. Make
sure the screws clamp against the machined face on the shaft.
Insert the threaded locking knobs through the centre of
each operating wheel and finger tighten.
Fig 01-02
Grub screws
D
Machined face
107712
AW216TS
Workshop
1.1 kW 50Hz 230V 1ph
216 mm / 30 mm
0° to 45°
45 mm
65 mm
370 mm
570 mm x 400 mm
320 mm (bench mounted)
570 mm x 675 mm
100 mm and 63 mm
850 m³/hr
670 mm x 695 mm x 420 mm
Locking knob
Code
Model
Rating
Power
Blade Dia/Bore
Blade Tilt
Max Depth of Cut @ 45˚
Max Depth of Cut @ 90˚
Max Width of Cut with Fence
Table Size
Table Height
Table Size With Extensions
Dust Extraction Outlet
Min Extraction Airflow Required
Bench Mounted
70 kg
Stand/Cabinet Mounted
Weight
2. Undo and remove the screws,washers & nuts to separate
the two parts of the dust extraction moulding (J). Position the
inner mounting plate over the machine cut out for the
extraction outlet. Repeat for the outer moulding, line up the
holes and replace the screws to secure the assembly (J) in
position, see fig 03-04-05.
8
107713
AW254TS
Workshop
1.5 kW 50Hz 230V 1ph
254 mm / 30 mm
0° to 45°
56 mm
80 mm
430 mm
485 mm x 680 mm
375 mm (bench mounted)
760 mm x 900 mm
100 mm and 63 mm
1,000 m³/hr
1,070 x 800 x 645 mm
1,070 x 800 x 1,170 mm
89 kg
Fig 03-04-05
J
Inner plate
Advertisement
Table of Contents
