Fig 78
3. Place the fence assembly up against the blade and lock in
place, see fig 78.
4. Using a pencil draw a line on the fence rail to mark the
postion, see fig 79.
Fig 79
5. Use a steel rule or vernier measure the distance between the
pointer & pencil line, remove the fence assembly & mark the
second position on the fence rail, see figs 80-81-82.
Fig 80-81-82
Vernier
Pointer
6. Locate the scale strip and peal off the backing, line-up the
scale's 'Zero' line with pencil line's pointer and carefully stick
down the scale strip, see 83-84.
Pencil line
23
SET UP AND ADJUSTMENT
Pointer position
pencil mark
Scale 'Zero' line
Pointer position
Fig 83-84
pencil mark
Continues over...