Axminster WORKSHOP AW216TS Original Instructions Manual page 25

Adjusting the Cutting Height
Release the clamping knob, adjust the blade height with the
rise and fall operating wheel, see fig 91, so that the blade teeth
are protruding through the work piece.
Fig 91
Adjusting the Pivot
Release the locking knob to the centre of the operating wheel
(a) to the side of the saw assembly and turn clockwise to pivot
the saw to a maximum of 45˚ degrees, indicated on the scale,
see fig 92-93-94.
Fig 92-93-94
Clamping knob
a
25
SET UP AND ADJUSTMENT
Saw pivot scale
45˚