Install Ofx-075 Expansion Power Module (To Be Determined) - JHCTech PADR-M101 User Manual

2.4.2 Install OFX-075 expansion power module (to be determined)

Tips ： If you want to install the OFX-075 power module, remove the R3H2 resistor on the
motherboard. The position of the resistor on the motherboard is as follows.
(This step requires professional guidance, please operate with caution)
Similarly, if you want to remove OFX-075, please be sure to solder R3H2 back to the designated
position on the motherboard.
Figure 2.5
Figure 2.6
30
User's Manual