Page 2
User’s Manual Version Note Ver. Note Date Writer A0.1 first publish 20201022 Echo Guo...
Page 3
User’s Manual Copyright The documentation and the software included with this product are copy- righted 2020 by Shenzhen JHC Technology Development Co.,Ltd. All rights are reserved. Shenzhen JHC Technology Development Co.,Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
Page 4
User’s Manual Product Warranty (2 years) JHC warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for 2 years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by JHC, or which have been subject to misuse, abuse, accident or improper installation.
Page 5
Technical Support and Assistance Step 1. Visit the JHC web site at www.jhctech.com.cn where you can find the latest information about the product. Step 2. Contact your distributor, sales representative, or JHC’s customer service center for technical support if you need additional assistance.
User’s Manual 1.1 Introduction The KGEC-6310 is a new edge controller by JHC, and the mainboard and sub-board are designed with an all-in-one architecture without connection. The KGEC-6310 is equipped with Intel® Whiskey lake- ® U CPU, support for 2* DDR4 2400Mhz, up to 32GB, and the 9th generation Intel UHD Graphics.
Page 11
User’s Manual KGEC- KGEC- KGEC- Model No. KGEC-6310-S001 6310-S002 6310-S003 6310-S004 Specification ® ® ® Intel Intel Intel ® Intel Core Core I5- Core I7- Celeron I3-8145U 8265U 8565U 4305U 2*DDR4 Up to 2*DDR4 Up 2*DDR4 Up 2*DDR4 Up Mermory...
User’s Manual 1.3 Specifications 1.3.1 General CPU: Intel® Whiskey lake-U CPU System Memory: 2*DDR4, 2400MHz, up to 32GB Watchdog Timer: 255-level interval timer, setup by software USB: 2*USB3.1, Type A, 2*USB2.0 Type A Serial Ports: 2*RS232/422/485 with TVS isolated (DB9) DIO:8-bit isolated (1*10pin phonenix) Expansion Interface: 1*Mini PCIe with PCIe X1+USB signal, 1*SIM slot, support 1*4G/LTE/Wifi/BT/GPS...
User’s Manual Storage temperature: -40 ~ 85° C (-40 ~ 185° F) Vibration loading during operation: 5grms/5~500Hz/random/in working (SSD); 1grms/5~500Hz/random/in working (HDD) Shock during operation: 50g peak acceleration(11ms duration)(SSD); 20g peak acceleration(11ms duration)(HDD) EMC/ Certification: CE/FCC Class B 1.5 Order information Model No.
User’s Manual 1.6 Mechanical Specifications The KGEC-6310 edge controller is assembled by the splice of The OSBC (single-board computer ECM- I909) and the Sub-card (ECB-256) of JHC, and installed in the universal aluminum rectangular profile housing. ECM-I909 Front Picture 1.1: ECB-I909 Front ECM-I909 Rear Picture 1.2: ECB-I909 Rear...
Page 15
User’s Manual ECB-256 Front Picture 1.3: ECB-256 front ECB-256 Rear Picture 1.4: ECB-256 rear...
Page 16
User’s Manual KGEC-6310 Front Panel Picture 1.5: KGEC-6310 Front Panel KGEC-6310 Rear Panel Picture 1.6: KGEC-6310 Rear Panel...
User’s Manual 2.1 Introduction The following sections show the internal switch settings and the external connectors and pin assignments for applications. 2.2 Switches The KGEC-6310 edge controller has a number of switches inside the chassis that allows you to configure your system to suit your application.
User’s Manual 2.2.2 AT/ATX Power on mode selection Picture 2.2: AT/ATX The KGEC-6310 provides an AT/ATX SW, which users can set Power-on mode by it. When you dial it at AT, it means power on by AC Power; When you dial it at ATX, it means power on by Power button. 2.3 I/O/Button/LED Indication KGEC-6310 Front:...
User’s Manual 2.3.2 USB The USB device allows data exchange between your computer and a wide range of simultaneously accessible external Plug and Play peripherals. The KGEC-6310 provides 2*USB3.1, 2*USB2.0. The USB interface can be disabled in the system BIOS setup.
User’s Manual 2.3.3 HDMI The KGEC-6310 provides a high-resolution DP display port. They can support the most resolution up to 4096*2304@60Hz. Table 2.4 for HDMI pin assignments. Picture 2.8: HDMI Table 2.4: HDMI Pin Assignments Signal Signal Signal DATA2_P DATA0_N DATA2_N CLK_P DATA1_P...
User’s Manual DDC_CPU_CLK_L DDC_CPU_DATA_L CPU_TMDS_TN1_C CPU_TMDS_TP1_C +5VS_HDMI_I3 HDMI_HPD3 CPU_TMDS_TN0_C CPU_TMDS_TP0_C CPU_TMDS_CLKP_C CPU_TMDS_CLKN_C 2.3.5 Power input The KGEC-6310 provides a 2*2Pin Phoenix for DC 12-24V power input. The power input use a double- layer power socket, and the upper and lower layers can be used as power input or output separately, and it is also connected in parallel with the built-in DC_OUT circuit.
User’s Manual 2.3.6 COM The KGEC-6310 provides 2*COM through the 2* d-sub 9-pin connector. COM1/2 can be configured as RS232/422/485, Table 2.1 for COM pin assignments. Picture 2.11: COM Table 2.7: COM1/COM2 Pin Assignments RS-232 signal RS-422 signal RS-485 signal DATA- DATA+ 2.3.7 DIO...
User’s Manual 2.3.8 SATA The KGEC-6310 provides a standard SATA3.0 interface with a data transfer rate up to 6Gb/s for connecting SATA devices. Table 2.9 for SATA pin assignments. Picture 2.13: SATA Table 2.9: SATA1 Pin Assignments Signal Signal 2.3.9 SATA Power Picture 2.14: SATA Power Table 2.10: SATA Power Pin Assignments Signal...
User’s Manual +V1.5 +V3.3 2.3.12 M.2 The KGEC-6310 provides 1*M.2 connector with PCIe X1+USB2.0 signal, expansion of Wifi/BT module signal, Install M.2 E-key 2230 modules such as SATA SSD module that comply to the M.2 E-key 2230 specifications into the M.2 slot. Picture 2.17: M.2 2.3.13 LED The KGEC panel has one power indicator, one hard disk indicator, three network connection status...
User’s Manual 2.4 Installation 2.4.1 HDD/SSD installation Step 1: unscrew the 2 screws on the HDD/SSD bracket of the rear panel. Step 2: remove the HDD/SSD stent. Step 3: load the HDD/SSD into the bracket and tighten the 4 screws on the left and right sides to fix the HDD/SSD.
User’s Manual Picture 2.22: HDD/SSD installation(2) Picture 2.23: HDD/SSD installation(3) 2.4.2 Mini PCIe installation Step 1: Unscrew the HDD bracket and 5 screws of the side plate and remove the side plate Step 2: Unscrew the 10 screws on the side plate and bottom plate, and remove the side plate and bottom cover...
Page 32
User’s Manual Picture 2.24: Mini PCIe installation(1) Picture 2.25: Mini PCIe installation(2)...
User’s Manual Picture 2.26: Mini PCIe installation(3) Step 3: Insert the Mini PCIe module and turn the screws. Picture 2.27: Mini PCIe installation(4) Step 4: Complete the installation of the machine in reverse steps. 2.4.3 mSATA installation Step 1: it is consistent with Mini PCIe module installation steps. For details, please refer to "2.4.2 Mini PCIe installation- step 1".
User’s Manual Step 2: it is consistent with Mini PCIe module installation steps. For details, please refer to "2.4.2 Mini PCIe installation- step 2". Step 3: Unscrew the 6 screws on the ECB-256 and take out the ECB-256. Picture 2.33: mSATA installation(1) Step 4: Insert the mSATA module and turn the screws.
User’s Manual 3.1 BIOS Description BIOS is the communication bridge between hardware and software. How to correctly set the BIOS parameters is crucial for the system to work stably and whether the system works at its best. This chapter describes how to change the system settings through the BIOS settings. Note: For the purpose of better product maintenance, the manufacture reserves the right to change the BIOS items presented in this manual.
User’s Manual 3.2 BIOS parameter settings When you start the Setup Utility, the main menu appears. The main menu of the Setup Utility displays a list of the options that are available. A highlight indicates which option is currently selected. Use the cursor arrow keys to move the highlight to other options.
User’s Manual 3.2.1 BIOS Navigation Keys Enter the SETUP settings interface, The BIOS navigation keys are listed below: Table 3.1: The BIOS navigation keys FUNCTION Exit the current menu ↑↓→← Scrolls through the items on a menu Change Opt. Enter Select General Help Previous Values...
Page 39
User’s Manual BIOS Vendor (American Megatrends) This item shows the information of the BIOS vendor. Core Version (5.13) This item shows the information of the Core Version. Project Version (V909S 0.01 X64) This item shows the information of the motherboard Version. Build Date and Time This item shows the information of the BIOS build date and time Processor Information...
User’s Manual IGFX VBIOS Version This item shows the Current VBIOS version of the CPU integrated graphics. Total Memory This item shows the total memory size of the current motherboard. Memory Frequency This item shows the current memory operating frequency. PCH Information This item shows the basic information about PCH, including name, PCH SKU, etc.
Page 41
User’s Manual ▶ CPU Configuration The configuration of the central processor, enter this sub-menu, there will be detailed details of the CPU, as well as various settings of the CPU. ▶ Power & Performance This item in the menu shows how to set the Power Management Control of CPU and GT.
Page 43
User’s Manual ▶ Trusted Computing Trusted computing, enter this sub-menu, there will be the setting of the encryption security module (the motherboard will install the encryption module hardware will take effect)
Page 44
User’s Manual ▶ ACPI Settings Advanced configuration and power management interface settings, enter this submenu, there will be ACPI related settings. ACPI Sleep State (S3 (Suspend to RAM)) This item allows user to enter the ACPI S3 (Suspend to RAM) Sleep State (default). Press <Esc>...
Page 45
User’s Manual Super IO Configuration settings, enter this sub-menu, there will be set COM working mode or disabled the Serial port function. ▶ Hardware Monitor Hardware monitoring, enter this sub-menu, there will be CPU temperature, System temperature, status display of each common working voltage. ▶...
Page 46
User’s Manual CSM Support Compatibility Support Module, which is a compatibility module, is a special module of UEFI and provides compatibility support for system that do not support UEFI. GateA20 Active This item indicates whether to disable GA20 through the BIOS server or keep the activation status all the time.
User’s Manual ▶ USB Configuration USB configuration, enter this sub-menu, there will be USB-related detailed settings. Legacy USB Support This item is used to set the USB interface support. If you need to support USB devices under DOS, such as U disk, USB keyboard, etc., set this item to [Enabled].
Page 48
User’s Manual ▶ Memory Configuration Memory configuration, enter this submenu, there will be detailed memory information.
Page 49
User’s Manual ▶ Memory Thermal Configuration Memory Power and Thermal Throttling This item contains the configuration of the Memory Power and Thermal Throttling. Memory Thermal Management This item sets the Memory Thermal Management on(Enabled) or off(Disabled). ▶ Memory Training Algorithms This item shows the information of the Memory Training Algorithms.
Page 50
User’s Manual ▶ Graphics Configuration Image processing configuration, enter this sub-menu, there will be CPU-integrated graphics related settings.
Page 51
User’s Manual ▶ External Gfx Card Primary Display Configuration ▶ LCD Control Primary IGFX Boot Display This item sets IGFX main display device on POST stage, not affected by external graphics card, options are HDMI, LFP, EFP3, DP, EFP4. It defaults by VBIOS. LCD Panel Type This item sets resolution of the motherboard LVDS screen.
Page 52
User’s Manual VT-d This item sets the VT-d technology to open or close. The default is Enabled. PCH-IO Configuration (South Bridge Configuration) ▶ PCI Express Configuration...
Page 53
User’s Manual ▶ SATA And RST Configuration SATA hard disk and fast storage configuration, enter this sub-menu, there will be related settings of the hard disk.
User’s Manual ▶ USB Configuration 3.2.5 Security menu Administrator Password This item sets the information of the administrator password. User Password This item sets the information of the normal user password. ▶ Secure Boot...
User’s Manual 3.2.6 Boot menu Setup Prompt Timeout Setup prompts for waiting time. This option is to set the time to wait for the Del key to enter the BIOS setup after booting. Bootup NumLock State Set the state of the small numeric keypad at startup. Quiet Boot Switch full screen logo control...
User’s Manual Fast Boot Turn the quick start function on or off. When set to "Enabled", the system will skip some detection items and reduce the startup time. New Boot Option Policy 3.2.7 Save & Exit menu Save changes and Exit; This item enables you to save the changes that you have made and exit.
User’s Manual This item enables you to save the changes that you have made and reset. Discard Changes and Reset; This item enables you to discard the changes that you have made and reset. Save Changes; This item enables you to save the changes that you have made. Discard Changes;...
User’s Manual The KGEC-6310 comes with a CD-ROM that contains all drivers and utilities that meet your needs. 4.1 Follow the sequence below to install the drivers: Figure 5.1 win7 drivers Step 1 – Install Audio Driver Step 2 – Install Chipset Driver Step 3 –...
User’s Manual 3. The system will help you install the driver automatically Step 4 –Install Chipset Driver 1. Double click on the Chipset folder and double click on the Setup.exe 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 5 –Install ME Driver 1.
User’s Manual 5.1 WDT and GPIO /* ====================================================================== * void jhctech_init(); * function description: library initialization, this function must be called before calling other functions * parameter description: * creation date: 5*======================================================================*/ /* ====================================================================== * void jhctech_init (); * function description: library release, Pair with jhctech_init, release the library's occupied resources when not needed * parameter description:...
Page 63
User’s Manual Bit =1, means output high level Bit =0, means output low level Note: Value Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 GPIO pin PIN8 PIN7 PIN6 PIN5 PIN4 PIN3 PIN2 PIN1 creation date: 5*========================================================================*/ /*========================================================================== * void MB_gpio_init (); * function description: initialization function of the motherboard gpio, this function must be called once before using it * parameter description:...