JHCTech KMDA-3601 User Manual
  1. Manuals
  2. Brands
  3. JHCTech Manuals
  4. Industrial PC
  5. KMDA-3601
  6. User manual

JHCTech KMDA-3601 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
User's Manual
KMDA-3601
Ver.A1.0
Date:11, September, 2018

Advertisement

Table of Contents
loading

Related Manuals for JHCTech KMDA-3601

Summary of Contents for JHCTech KMDA-3601

  • Page 1 User’s Manual User’s Manual KMDA-3601 Ver.A1.0 Date:11, September, 2018...
  • Page 2 User’s Manual Version Note Ver. Note Date Writer A1.0 first publish 20180911 Tracy Liu...
  • Page 3 Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. RTL is a trademark of Realtek Semi-Conductor Co., Ltd. All other product names or trademarks are properties of their respective owners. For more information on this and other JHC products, please visit our websites at: http://www.jhctech.com.cn...
  • Page 4 User’s Manual Product Warranty (2 years) JHC warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by JHC, or which have been subject to misuse, abuse, accident or improper installation.
  • Page 5 Technical Support and Assistance Step 1. Visit the JHC web site at www.jhctech.com.cn where you can find the latest information about the product. Step 2. Contact your distributor, sales representative, or JHC’s customer service center for technical support if you need additional assistance.

  • Page 6: Table Of Contents

    User’s Manual CONTENTS General Information ............................1 1.1 Introduction ............................2 1.2 Features ............................2 1.3 Specifications ........................... 3 1.3.1 General ..........................3 1.3.2 Display ..........................3 1.3.3 Ethernet ..........................3 1.3.4 Audio............................. 3 1.3.5 Power Consumption......................3 1.4 Environmental Specifications ......................4 1.5 3601 Series Specifications .......................
  • Page 7 User’s Manual 2.4.8 COM1/2 Connector ......................19 2.4.9 COM3/4 Connector ......................19 2.4.10 Remote Switch signal Connector..................20 2.4.11 AT/ATX SW ........................20 2.4.12 LED ........................... 20 2.5 Installation ............................. 21 2.5.1 HDD/SSD Installation ......................21 2.5.2 Installing mini-PCIe ......................25 2.5.3 Installing MSATA .......................

  • Page 8: General Information

    User’s Manual General Information...

  • Page 9: Introduction

    User’s Manual 1.1 Introduction KMDA-3601 is a high-performance Box Computer with aluminum chassis and fanless design. It powered ® by the latest Intel Skylake-S/Kabylake-S CPU. It supports dual channel DDR4 2133/2400MHz memory, ® up to 32GB. It features gen.9 Intel HD Graphics.

  • Page 10: Specifications

    User’s Manual 1.3 Specifications 1.3.1 General ® CPU: Intel Skylake-S/Kabylake-S Celeron/Pentium/Core I3/I5/I7 CPU ® ® Chipset: Intel Q170, optional Intel H110 System Memory: 2*DDR4 2133/2400MHz SODIMM, Up to 32GB Watchdog Timer: 255-level interval timer, setup by software Serial Ports: 2* RS232 DB9 male, 2* RS232/422/485, DB9 male USB: 4/6*USB 3.0 Type A ports(front), 2*USB2.0 Type A ports(rear), 1* USB 2.0 Type A port (inside) Expansion Interface:...

  • Page 11: Environmental Specifications

    User’s Manual Power Adapter: AC to DC 19V/6.32A, 120W Power Requirement: Minimum power input: DC 19V/3A 1.4 Environmental Specifications Operating temperature: -20 ~ 65° C (Fanless with wide operating temp. SSD, Airflow) -10 ~ 55° C (Fanless with HDD, Airflow) Relative humidity: 10~90% @ 40°...

  • Page 12: Mechanical Specifications

    User’s Manual 1.6 Mechanical Specifications Main Board Front (AXM-I950) Figure 1.0 Figure 1.1...
  • Page 13 User’s Manual Main Board Rear (AXM-I950) Figure 1.2 Sub-card(ECB-147-T001) Figure 1.3 Sub-card(ECB-147-S002) Figure 1.4...
  • Page 14 User’s Manual Sub-card(ECB-148) Figure 1.5 Sub-card(ECB-149) Figure 1.6...
  • Page 15 User’s Manual KMDA-3601 Dimension: Unit: mm Figure 1.7...

  • Page 16: Hardware Installation

    User’s Manual Hardware Installation...

  • Page 17: Introduction

    2.2.1 Setting Jumpers You can configure your KMDA-3601 to match the needs of your application by setting the jumpers. A jumper is the simplest kind of electrical switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 18: Jumper Location

    2.3 Jumper Location The KMDA-3601 high-performance Box Computer has a number of jumpers inside the chassis that allows you to configure your system to suit your application. The table below shows the function of each of the board’s jumpers:...

  • Page 19: Clr_Cmos1-Clear Cmos Data

    User’s Manual 2.3.1 CLR_CMOS1-Clear CMOS Data Figure 2.4 If you encounter the followings a) CMOS data becomes corrupted. b) You forget the supervisor or user password. you can reconfigure the system with the default values stored in the ROM BIOS. To load the default values stored in the ROM BIOS, please follow the steps below.

  • Page 20: Jp3/Jp4-Com3/Com4 Ri/5V/12V Power Supply Select

    User’s Manual 2.3.2 JP3/JP4-COM3/COM4 RI/5V/12V Power supply Select Figure 2.5 2.4 I/O/Button/LED Indication NOTE: I/O Indication takes KMDA-3601-S001 for example, Other sub-series products only have different number of interfaces. Front view: Figure 2.6...

  • Page 21: Ethernet Connector (Lan)

    Figure 2.7 2.4.1 Ethernet Connector (LAN) The KMDA-3601-S001 is equipped with 6*Intel I210AT chips and 1 Intel I219LM for 10/100/1000Mbps Ethernet controllers. The product provides 3*LAN, 4*POE, with LED indicators on the front side to show its Active/Link status (Green LED) and Speed status (yellow LED).

  • Page 22: Usb Connector

    The USB device allows data exchange between your computer and a wide range of simultaneously accessible external Plug and Play peripherals. The KMDA-3601-S001 provides 6*USB3.0, 3*USB2.0(one inside for dongle). The USB interface complies with USB UHCI, Rev. 2.0 compliance. The USB interface can be disabled in the system BIOS setup.

  • Page 23: Hdmi

    StdA_SSTX- StdA_SSTX+ StdA_SSRX- Shell Shield 2.4.3 HDMI The KMDA-3601 provides a high-resolution HDMI display port, it supports the most resolution up to 3840*2160@30Hz. Table 2.4 for HDMI pin assignments. Figure 2.11 HDMI Connector Table 2.4: HDMI Pin Assignments Signal Signal...

  • Page 24: Dio Connector

    DATA1_N CTRL DATA2_P 2.4.5 DIO Connector The KMDA-3601-S001 provides a 16-bit iso. DIO by a 2*10Pin 8-bit DI/DO terminal connector in front. The Pin assignments are as follows: Figure 2.13 8-bit DI/DO Connector Table 2.6: 8-bit DI/DO Pin Assignments Pine...

  • Page 25: Power Input Connector (Dc-In)

    Signal Signal 2.4.7 VGA The KMDA-3601 provides a high-resolution VGA interface via D-sub 15-pin connector to support a VGA CRT monitor, it supports the most resolution up to 2650*1600@60Hz. Table 2.8 for VGA pin assignments. Note: KMDA-3601-T001 has no VGA interface.

  • Page 26: Com1/2 Connector

    User’s Manual Note: NC represents —No Connection 2.4.8 COM1/2 Connector The KMDA-3601 provides 2 serial ports of COM1/2 by 2*D-sub 9-pin connectors. COM1/2 can be configured as RS232、RS422 or RS485 by BIOS setup. Table 2.9 for pin assignments. Figure 2.16 COM1/2 Connector Table 2.9: COM1/2 Serial Ports Pin Assignments...

  • Page 27: Remote Switch Signal Connector

    2.4.11 AT/ATX SW The KMDA-3601 provides a AT/ATX SW, which users can set Power-on mode by it. When you dial it at AT, it means power on by AC Power; When you dial it at ATX, it means power on by Power button.

  • Page 28: Installation

    User’s Manual Table 2.12 for LEDs state of CPU temperature class. Table 2.12: LEDs state of CPU temperature class. State Warning Yellow High Green Normal 2.5 Installation 2.5.1 HDD/SSD Installation Step 1: Unscrew 6 screws on the underside, remove the bottom bracket; Step 2: Unscrew 2 screws on the front/rear panel, remove the bottom cover;...
  • Page 29 User’s Manual...
  • Page 30 User’s Manual...
  • Page 31 User’s Manual...

  • Page 32: Installing Mini-Pcie

    User’s Manual 2.5.2 Installing mini-PCIe Step 1: Unscrew 6 screws on the underside, remove the bottom bracket; Unscrew 2 screws on the front/rear panel; Rotate the bottom assembly 180°, separate the SATA cable which connected the HDD/SSD with the mother board; Unscrew 7 screws and 10 serial copper columns on the rear panel, remove the rear panel;...
  • Page 33 User’s Manual...
  • Page 34 User’s Manual...
  • Page 35 User’s Manual Step 2: Hold the Mini PCIe module with its notch aligned with the Mini PCIe socket of the board and insert it at a 30 degrees angle into the socket;...

  • Page 36: Installing Msata

    User’s Manual Step 3: Screw one screw to the holder; Step 4: Follow the reverse steps of disassembly to complete the product installation. 2.5.3 Installing MSATA Step 1: The step here is the same as above chapter “2.5.2 Installing Mini PCIe Module -Step 1”, For details, please refer to the above chapter “2.5.2 Installing Mini PCIe Module -Step 1”...
  • Page 37 User’s Manual Screw one screw to the holder as shown in the picture. Step 4: Follow the reverse steps of disassembly to complete the product installation.

  • Page 38: Bios Setup

    User’s Manual BIOS Setup...

  • Page 39: Bios Description

    User’s Manual 3.1 BIOS Description BIOS is the communication bridge between hardware and software. How to correctly set the BIOS parameters is crucial for the system to work stably and whether the system works at its best. This chapter describes how to change the system settings through the BIOS settings. For details, please refer to the following.

  • Page 40: Bios Navigation Keys

    User’s Manual 3.2.1 BIOS Navigation Keys Enter the SETUP settings interface, The BIOS navigation keys are listed below: Table 3.1: The BIOS navigation keys FUNCTION Exit the current menu ↑↓→← Scrolls through the items on a menu Change Opt. Enter Select General Help Previous Value...
  • Page 41 User’s Manual BIOS Information This item shows the information of the BIOS vendor, version, build date and time etc. Board Information This item shows the basic information of the motherboard, including the Board ID and BIOS Version of the motherboard. Processor Information This item shows the basic information about the currently used processor, including name, type, speed, ID, core, Microcode version, etc.

  • Page 42: Advanced Menu

    User’s Manual This item shows the version number of the ME firmware ME firmware SKU This item shows the ME firmware model number System Language Set the language interface of the BIOS. System Date Set the date. The format of the date is <week><month><day><year>. System Time Set the time.
  • Page 43 User’s Manual This item contains the PCH firmware configuration, enter this sub-menu, there will be detailed details of the ME, as well as related settings of the AMT function. Trusted Computing Trusted computing, enter this sub-menu, there will be the setting of the encryption security module (the motherboard will install the encryption module hardware will take effect) ACPI Settings Advanced configuration and power management interface settings, enter this submenu, there will be...

  • Page 44: Chipset Menu

    User’s Manual CSM (Compatibility Support Module) configuration, enter this sub-menu, there will be various settings to support UEFI startup and non-UEFI startup. If you need to start the traditional MBR device, you need to enable CSM. Turning off the CSM turns it into a pure UEFI boot. USB Configuration USB configuration, enter this sub-menu, there will be USB-related detailed settings.

  • Page 45: Security Menu

    User’s Manual PEG graphics configuration, enter this sub-menu, there will be related settings for the external graphics card. PCH-IO Configuration (South Bridge Configuration) SATA And RST Configuration SATA hard disk and fast storage configuration, enter this sub-menu, there will be related settings of the hard disk.

  • Page 46: Boot Menu

    User’s Manual 3.2.6 Boot menu Setup Prompt Timeout Setup prompts for waiting time. This option is to set the time to wait for the Del key to enter the BIOS setup after booting. Bootup NumLock State Set the state of the small numeric keypad at startup. Quiet Boot Switch full screen logo control Fast Boot...

  • Page 47: Save&Exit Menu

    User’s Manual 3.2.7 Save&Exit menu This item includes: Save changes and Exit; Discard Changes and Exit; Save Changes and Exit; Discard Changes and Reset; Save Changes; Discard Changes; Default Changes; Boot Override You can directly select the device to be started, press “Enter” to start directly.

  • Page 48: Driver Installation

    User’s Manual Driver Installation...

  • Page 49: Follow The Sequence Below To Install The Drivers

    User’s Manual The KMDA-3601 comes with a CD-ROM that contains all drivers and utilities that meet your needs. 4.1 Follow the sequence below to install the drivers: Figure 4.1 Step 1 – Install AMT Driver Step 2 – Install Audio Driver Step 3 –...

  • Page 50: Cpu Temp Led Driver

    3. The system will help you install the driver automatically 4.3 CPU TEMP LED driver The KMDA-3601 provides temperature showing in LEDs, economic and reliable. Users can monitor the working state of the CPU according to the display of the LED. Please perform the following operations, making LEDs work normally.

  • Page 51: System Resource

    User’s Manual SYSTEM RESOURCE...

  • Page 52: Wdt And Gpio

    User’s Manual 5.1 WDT and GPIO /* ====================================================================== * void jhctech_init(); * function description: library initializated, This function must be called before calling other functions * parameter description： * creation date： 5*======================================================================*/ /* ====================================================================== * void jhctech_init(); * function description: library release, Pair with jhctech_init, release the library's occupied resources when not needed * parameter description：...
  • Page 53 User’s Manual Parameter: port represents the number of the GPIO, 1 or 2 Mode 8 bit of a bit, each bit controls the input and output mode of a GPIO pin, Bit =1, the corresponding pin is used as the input port. Bit =0, the corresponding pin is used as an output port.
  • Page 54 User’s Manual /*========================================================================== 1 * int smbus_16pin_gpio_input(int port); * function description：read the motherboard GPIO input level * parameter description： Return value：return a byte (8 bit), each bit of the 8 bit corresponding to the level state of a GPIO Return value Bit7 Bit6 Bit5...

Table of Contents