Installing Mini Pcie Module - JHCTech KMDA-2701 User Manual

2.5.2 Installing Mini PCIe Module

Step 1: Unscrew 4 screws on the bottom cover, remove the bottom bracket.
Unscrew 2 screws on the front/rear panel.
Rotate the bottom assembly 180° , separate the SATA cable which connected the HDD/SSD with
the mother board.
Unscrew 6 screws and 8 serial copper columns on the rear panel, remove the rear panel.
Unscrew 5 screws and 6 serial copper columns on the front panel. Unlock the spring pad and nut
of the DC-IN on the front panel, remove the front panel.
Unscrew 7 screws on the sub-board, remove the sub-board.
Figure 2.38
Figure 2.39
28
User's Manual