Introduction; Jumpers And Connectors; Board Layout: Jumper/Switch And Connector Locations - JHCTech PADR-M101 User Manual

2.1 Introduction

The following chapters will state the product's mainboard DIP switch settings, external and internal
connectors, and corresponding pin assignments.

2.2 Jumpers and Connectors

There are dial switches on the motherboard of PADR-M101, which is convenient for users to set according
to different configuration requirements. The following table lists the functions of the DIP switches on the
motherboard.
Table 2.1: Switches and Jumpers
Label
ATX_AT
CMOS/CLR
J_PANEL1

2.2.1 Board layout: Jumper/Switch and Connector Locations

Function
Set Power-on mode at AT or ATX
Clear CMOS Data Setting
eDP screen 3.3V/5V/12V Power supply Select
Figure 2.1 Jumper and Connector Location
10
User's Manual