JHCTech PADR-M101 User Manual page 37

User's Manual
Figure 2.3
Step 4: Unscrew the 4 fixing screws, remove the original hard drive, and then install the new HDD/SSD
hard drive in the hard drive bay, and tighten the 4 screws to fix the hard drive.
Figure 2.4
Step 5: Put the hard disk and the hard disk bracket into the hard disk slot, and tighten the 4 screws to fix
the hard disk bracket according to step 3.
Step 6: Install the hard disk cover, and tighten the 5 screws according to step 1.
29