Commands
Command
LCT+LSM <value>
Examples
Set the Light source mode to Full normal:
LCT+LSM 2
LCT+LAD–Light Adjust
Sets the laser source brightness level.
Commands
Command
Description
LCT+LAD+/-
Adjusts the light source brightness level.
Examples
Add one to the laser source brightness level:
LCT+LAD+
Subtract one from the laser source brightness level:
LCT+LAD-
SOD+MUT-Mute
Changes the projector mute function.
Commands
Command
SOD+MUT <value>
Examples
Turn on mute:
SOD+MUT ON
APS Series Technical Reference
020-103593-01 Rev. 1 (07-2022)
Copyright
2022 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Description
Sets the Light source mode
Description
Changes the projector mute function.
Serial API commands
Value
0 = Full normal
1 = Normal (Default)
2 = ECO1
3 = ECO2
Value
—
Value
ON = Turns on the mute function
OFF = Turns off the mute function
19