Updating The Firmware From Stratasync - Viavi NSC-200 User Manual

Chapter 2 Meter Setup

Updating the firmware from StrataSync

Once you are logged into StrataSync, you can update the firmware of your unit via Ethernet.
1. Connect the Companion to the AC charger adapter to ensure an uninterrupted supply
of power during the update.
2. Reboot the Companion.
3. Connect the Companion to your network via wired
Ethernet.
4. Go back to the Main screen and select the Options
menu in the upper right. The Options menu appears.
5. Select Upgrade Firmware. The Upgrade Firmware
screen appears, showing the current firmware version
and if an update is available.
You can also get to the Upgrade Firmware screen from
the Main menu and selecting Show More.
6. If an update is available, select Start Upgrade to
update the unit.
The update will begin and the meter will power off when
finished. Please wait as this could take 10-15 minutes, based
on the size of the update file and connection speed.
NOTE:
You need the appropriate permissions in StrataSync to
update the firmware.
56
NSC-200 User Guide
22162977
Options menu
July 2022