Status Indicators - Viavi NSC-200 User Manual

Chapter 1 Quick Tour

Status indicators

The indicators on the unit show the battery and network connect status, as follows:
Power – Indicates the power or battery status
Blinking green – Powering up or down
y
Solid green – Unit is on
y
Solid yellow – Battery remaining is less than 30%
y
Solid red – Battery remaining is less than 10%
y
Flashing red – Battery is very low and unit will shutdown soon
y
Pair – Indicates the Bluetooth radio status
Blinking – Waiting for pairing
y
Solid – Paired with the mobile device
y
Service – Indicates the status of the service tests
Network – Indicates the the status of the service tests
Link – Indicates the status of the service tests
Physical – Indicates the status of the physical layer
SFP – Indicates the SFP+ port is the active port for the current test
ETH – Indicates the ethernet port is the active port for the current test
WiFi – Indicates the WiFi interface is the active interface for the current test
CHG – Indicates the charge status. The indicator is off when the unit is not plugged in
or charging.
Blinking orange – Charging, battery is less than 90%
y
Solid orange – Charging is almost complete
y
Solid green – Charge complete
y
Flashing red – Error in charging or powering the unit. Make sure you are using
y
the VIAVI charger supplied with the unit and try again.
The meter may need to be serviced by a Certified Repair Center. Before sending
in the unit for repair, contact VIAVI for an RMA.
22
NSC-200 User Guide
22162977 July 2022