Installing A Tape Drive In The Bottom Shelf - HP Vectra XM 5Series User Manual

13 Install any other accessories before replacing the cover. Replace the side bezel.
Reconnect all cables and power cords.

INSTALLING A TAPE DRIVE IN THE BOTTOM SHELF

A tape drive can be installed in the bottom shelf. Order HP C4320A.
1 Disconnect the computer's power supply cord from the power outlet, and disconnect the
PC from any telecommunications network.
2 Remove the computer's cover.
3 If there is a device in the middle shelf, remove it.
4 If there is no device in the middle shelf, remove the bezel. The bezel snaps in and out,
and can be removed without any tools.
5 Remove the two bezels from the bottom shelf.