Table of Contents
Advertisement
To install a main memory module:
1
Disconnect the computer's power supply cord and any connection to a
telecommunications network.
2
Remove the computer's cover and power supply.
3
Align the main memory module directly over the socket. Slide the memory module into the
slot at 45°. Firmly press the memory module completely into the connector.
4
Pivot the memory module to the vertical position and click into place.
5
Repeat this procedure for each memory module you are installing.If you need to remove a
main memory module:
Release the retaining clip and pull the module forward and out of the socket
6
Install any other accessories before replacing the cover and power supply. Reconnect all
cables and power cords.
7
Check the HP Summary Screen to verify the new configuration. Refer to "The HP
Summary Screen and Setup Program" in chapter 3.
Advertisement
Table of Contents
