Configure The Linking Device And Logix Block Properties - Allen-Bradley 9308-RSFB64ENE User Manual

Configure the Linking Device and Logix Block Properties

Use the following information to configure the linking device and Logix Block
module properties.
Configure Linking Device Properties
1. In the Controller Organizer, right-click the linking device and
choose Properties.
The Module Properties dialog box appears.
In the General tab, you can rename the linking device, add a description,
set the IP address, and choose the type of electronic keying you prefer.
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Create an RSLogix 5000 Software Project Chapter 5
87