Link Blocks
You can link function blocks only in the Strategy window. Do these steps.
1. In the Strategy window, click the Link icon
2. Click the first block.
The Output Parameter Selection dialog box appears.
You can mouse over the pins to read their descriptions at the bottom of the
dialog box.
3. Select a parameter, such as the OUT pin (as shown in the example).
The pin fills to show that it is selected.
4. Click OK.
A blue line is added to the block to represent the incomplete link.
5. Click the second block.
6. Select a parameter and click OK.
TIP
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Create an RSFieldbus Software Project
Press Shift to draw lines at 45° and 135°.
Press Control to draw lines at 0° and 90°.
Chapter 3
.
51