Table of Contents
Advertisement
6. Click OK.
The linking device is added to the HSE Host.
7. Click the Advanced Options tab.
Use the default of 'Creation based on Default Template.' Clear the box to
make your own selections.
8. Click OK.
The linking device is added to the HSE Host.
Create a New Fieldbus (H1) Link
Do these steps to associate the fieldbus with the H1 segment.
1. In the Project window, right-click the linking device and choose
New Fieldbus.
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Create an RSFieldbus Software Project
Chapter 3
33
Advertisement
Table of Contents
