Create The Physical Component; Create A New Bridge (Linking Device) - Allen-Bradley 9308-RSFB64ENE User Manual

Create the Physical
Component
2. In the Project window, right-click Fieldbus Networks and choose
Communication Settings.
The Communication Settings dialog box appears.
3. Verify the settings are the same as the dialog box shows, and click OK.
Do these steps to add bridges and devices to your project.

Create a New Bridge (linking device)

This section defines the linking device as the bridge from HSE to your H1 field
devices. You can add a bridge in either the Project window or the HSE window,
this example shows the former.
1. To open an existing project, choose Open from the ProjectFile menu.
You also can click the Open icon
2. In the Open dialog box, select your project by double-clicking it.
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Create an RSFieldbus Software Project
.
Chapter 3
31