Table of Contents
Advertisement
Chapter 3
Create an RSFieldbus Software Project
40
2. Select the device that you want to change to a Basic and click the left arrow
.
3. Repeat for any other devices that you want to change to a Basic.
4. Click Apply.
Edit Attributes
To change or delete an ID or tag for an H1, device, or bridge, do these steps.
1. To edit a tag, double-click the corresponding icon in the H1 window.
An Attributes dialog box appears.
2. Make the necessary changes, and then click OK.
3. To delete a tag, right-click the corresponding icon and choose
Delete Device.
Create a New Function Block
This section explains how to add function blocks to a device in the
physical component.
See
page 47
if you are adding a function block in the logical component.
1. In the Fieldbus (H1) window, expand the device by clicking
2. Right-click the FB VFD icon and choose New Block.
The New Block dialog box appears.
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
.
Advertisement
Table of Contents
