Linking Device Function Blocks; Introduction; Parameter Attributes - Allen-Bradley 9308-RSFB64ENE User Manual

Introduction

Linking Device Function Blocks

The linking device supports two function blocks: resource and Logix. The
resource block controls the linking device itself. The Logix Block is used to
move data between F
Logix controller.
The table shows the main topics in this section.
Topic
RES - Resource Block
LGX -Logix Block

Parameter Attributes

The following table describes the attributes used to define each function block
parameter. If an attribute does not appear for a specific parameter, it is not
applicable to that parameter.
Attribute
Index
Parameter
Data Type (length)
Valid Range/Options
Default Value
Units
Edit Mode
Description
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Fieldbus devices on H1 segments and a
OUNDATION
Description
Number that defines a specific parameter, may be different in each block.
Parameter name.
Structure in which data is presented.
Range or options in which the parameter can be configured.
Default value of the parameter.
Type of unit used.
Mode the block must be in to edit parameters.
Additional information describing the parameter.
7
Chapter
Page
106
112
105