Reset The Linking Device - Allen-Bradley 9308-RSFB64ENE User Manual

Reset Type Description
Reset device This restarts the linking device but does not change any
configuration.
Reset This restarts the linking device and deletes all downloaded
configuration fieldbus configurations. The linking device retains its network
configuration and web page password information through
this reset.
Reset to factory This resets the web page user name and password, resets all
defaults services (for example, web services), and clears all
downloaded fieldbus configuration.
Reset function This resets all block parameters to default. All blocks in the
block linking device are retained, including tag names and
parameters macrocycle timing.
Reset/delete This deletes all blocks in the linking device except for the
function blocks Resource Block. All Resource Block parameters are reset to
factory default, including the tag name.

Reset the Linking Device

The linking device can be reset in the following ways. Shaded cells indicate the
reset types described in this chapter.
When you reset the linking device, it no longer communicates with other
IMPORTANT
fieldbus devices. Make sure your process is shut down or under manual
control before you reset the linking device.
After you complete any type of reset, verify that the time and time zone
IMPORTANT
still are correct.
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Advanced Diagnostics and Hidden Web Pages
How
Web page reset (remotely)
Reset jumper (locally)
Web page reset (remotely)
RSLogix 5000 reset (remotely)
Reset button (locally)
Web page reset (remotely)
RSFieldbus Resource Block,
Default parameter (remotely)
RSFieldbus Resource Block,
Factory parameter (remotely)
Chapter 10
Information Is Found
Following procedures
See page 149.
Following procedures
See page 152
See page 149.
Following procedures
See page 151.
See page 151.
141