Create A Function Block In Logical Component - Allen-Bradley 9308-RSFB64ENE User Manual

Create a Function Block in Logical Component

Follow the same procedures as documented on
the blocks in the Process Cell window.
An attached function block in the Process Cell will have a question mark until the
block is attached to a device.
Do these steps to attach a function block to a control module.
1. In the Process Cell window, right-click the control module to which the
block is being attached and choose Attach Block.
The Attach Block dialog box appears.
2. Select the desired block and click OK.
The block is added to the logical component.
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Create an RSFieldbus Software Project
page 40, except make sure you add
Chapter 3
47