Table of Contents
Advertisement
Introduction
Create an RSFieldbus Software Project
This section describes procedures for creating a fieldbus project by using the
RSFieldbus configuration software.
Projects contain both a physical and logical component. The physical component
contains the project hardware and the logical component contains the function
blocks and algorithms that are used to control the project. Projects can be started
from either component.
You must have RSFieldbus software installed on the computer that will
IMPORTANT
be used as the host server.
In addition, you need all the device description (DD) and capabilities files
to configure your fieldbus devices. There is a DD file for each device type
provided by the manufacturer. The capabilities file, which has a
.cff extension, is located within the DD files.
The table lists the main topics described in this section.
Topic
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
3
Chapter
Page
28
31
43
48
55
59
63
63
27
Advertisement
Table of Contents
