Create A Project For The Controller - Allen-Bradley 9308-RSFB64ENE User Manual

Chapter 5 Create an RSLogix 5000 Software Project
Create a Project
for the Controller
78
This section shows how to use the RSLogix 5000 programming software to start
a project and configure a Logix5000 controller.
Do these steps to create a project.
1. Start the RSLogix 5000 software, and click the New icon
The New Controller dialog box appears.
The example shows information for instructional purposes.
2. Configure the controller by entering information in the New Controller
dialog box.
Field
Vendor
Type
Revision
Redundancy
Enabled
Name
3. Click OK.
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Description Field
Defaults to Allen-Bradley. Description
Choose the type of Chassis Type
controller from the pull-
down menu.
Defaults to the latest Slot
revision of the
ControlLogix controller.
You cannot override this
field until you click OK.
Clear the checkbox if you Create in
are not
using redundancy.
Type a name for the
controller. See
Conventions for Names
for more information.
.
Description
Type an optional
description for the
controller.
Choose a chassis type
from the pull-down menu.
Use the Up/Down arrow
to select the appropriate
slot number for the
controller in your chassis.
Use the default project
folder or click Browse to
select another database
location.