First, Turn On or Restart
Your PC
Then, go to the Setup
Program
1 Troubleshooting Your PC
HP Setup Program
HP Setup Program
Follow these instructions to check your PC's configuration when you
first use the PC:
If your PC is off, turn on the display and then the PC.
If the PC is already turned on, save your data, exit all programs and
restart your PC. For Windows NT 4.0, use the
command in the
your computer
automatically exit the operating system and restart the PC.
To go immediately to the Setup program, press
system startup.
The Setup program allows you to view and change the configuration of
your PC, such as the passwords and standby (power saving) mode. For
for information, refer to the Setup program's online help.
25
English
Shut Down – Restart
menu. This command will
Start
Delete
or F2 during