Replacing The Internal Battery - HP Net PC 20 Troubleshooting Manual

WARNING
Battery clip
This picture shows two possible
locations for the internal battery.
NOTE
1 Troubleshooting Your PC

Replacing the Internal Battery

Replacing the Internal Battery
There is a danger of explosion if the battery is incorrectly installed. For your
safety, never attempt to recharge, disassemble, or burn the old battery.
Replace the battery only with the same or equivalent type recommended by
the manufacturer. The battery in this PC is a lithium battery which does not
contain heavy metals, nevertheless, in order to protect the environment, do
not dispose of batteries in household waste. Please return used batteries to
the shop from which you bought them, or to the dealer from which you
purchased your PC, or to HP, so that they can either be recycled or disposed
of in an environmentally sound way. Returned used batteries will be accepted
free of charge.
1 Remove the PC's cover.
2 Remove the old battery by pressing the clip and then lifting the
battery clear of the battery holder with a screwdriver (note the
position of the cross).
3 Place the new battery in the battery holder, with the cross in the
same position as the old battery, and ensure that it is properly
seated.
You should order replacement battery HP 1420-0356 from your local
Sales and Service office, or a "CR2032 type" battery, which is available
from most local stores.
17 English
Battery clip