After Ironing; Self-Clean Function; Auto-Decalcification Feature - Fakir SKYFALL Manual

After ironing

1. Disconnect power supply and empty the water left in water tank.
2. Reconnect into power supply and disconnect after indicator light goes off, make
soleplate dry.
3. Let the iron completely cool down, then wipe flakes and any other deposits on the
soleplate with a damp cloth or a non-abrasive (liquid) cleaner.
4. Clean the upper part of iron with a damp cloth.
5. Always store the emptied iron horizontally on a stable surface with a cloth protecting
the soleplate.

Self-clean function

We should clean the unit regularly according to hardness of water and using frequency.
1. Fill water into the water tank and set the temperature selector to Max position
2. Connect into power supply and indicator light will be illuminated, make sure Steam
button is in the Dry position, then place iron as fig.4
WARNING!
Never pour white vinegar or other liquid cleaners for
eliminating calcium into water tank!
3. Once the light is off, hold the iron over the sink and turn steam button to SELF
CLEAN position (Fig.3) with a little force. Steam and boiling water will come out of
the soleplate while impurities and flakes will be flushed out.
4. Release the button as soon as water in the water tank has been used up.

Auto-decalcification feature

There is a decalcification box inside the appliance, which can absorb unsolvable
calcium ion and send out solvable natrium ion so that water can be softened, and the
process of calcium depositing would be much slower.
NOTE!
In order to keep soleplate smooth, never let any metal
materials rubs against it!
SKYFALL
21
EN