Ironing With Vertical Steam; Self Cleaning; After Finishing The Ironing - Fakir VERONICA User Manual

EN
· · ·
MAX
• Bring the On/Off button to (I) position. Steam lamp will light.
• Your iron is ready to use when the iron ready lamp is lit. Steam can exit by pressing
the steam button.
• Turn the steam control button to the unlock position for continuous steam. Turn the
steam control button back to the lock position in order to cut the steam.
NOTE!
When your appliance is operating, you can add water to the water tank, since the
water tank does not contain pressurized water.

Ironing with Vertical Steam

Through this feature, you can remove wrinkles on clothes, beddings or curtains in a
similar way to the appliances that iron on hangers. The high steam pressure of your
appliance will provide strong steam exit while holding the iron vertically. For best results,
use it on delicate or lightweight fabrics. Set the steam to MAX. mark to get maximum
level of steam. You can iron steam by spraying a few inches on top of the hanging
clothes or curtains.
WARNING!!
Do not directly come in contact with steam coming from the appliance.

Self Cleaning

We recommend you to use the self-cleaning function after every 10 hours of operation.
Turn the thermostat control button to the Self Clean setting. Your appliance will self-
clean in 1 minute.
WARNING!!
Do not iron while the appliance's self-cleaning function is activated.

After finishing the ironing

Set the thermostat control button to the minimum position. Remove the plug from the
outlet. Lay the iron on the back side to the upright position.
Cotton
Linen
20
YES
YES