Operating; Dry Ironing; Steam Ironing - Fakir RAPHAEL Instruction Manual

GB

Dry ironing

Steam ironing

24

OPERATING

Cihaz hem kuru ütülemeye hem de buharlı ütülemeye The
appliance has two iron portions. You can use dry ironing or
steam ironing, the details refer to the following:.
1. Place the steam station on a stable and level surface.
2. Press the release button with one finger and grasp the
iron's handle with the hand to rotate the iron anti-clockwise
to take out of the iron, and then put the iron on the steam
generator's front hook. And you do not need to secure the
iron onto the thermal insulating cushion during the
operation and can just put the iron on the front hook for
convenient using.
CAUTION!
Avoid being hurt, never press the locking pin to take out
of the iron.
1. Grasp the water tank's handle with the hand and press
the trigger with one finger to take out of the water tank,
then open the filling cap and fill water into it. You had
better use purified water with less calcium particles. After
it, close the filling cap. The max capacity of water tank is
1.5L, the water level shall not be exceeded the MAX mark.
2. Replace the detachable water tank properly.
3. Press the release button with one finger and grasp the
iron's handle with the hand to rotate the iron anti-clockwise
(see Fig. 1) to take out of the iron, and then put the iron on
the steam generator's front hook. And you do not need to
secure the iron onto the thermal insulating cushion during
the operation and can just put the iron on the front hook for
convenient using.
4. Connect plug to the wall outlet, press down the ON/OFF
switch, and the defaulted low steam rate indicator will
flash. Turn temperature dial to your desired setting, which
is depended on the fabric of garment, and the temperature
indicator will illuminate. Refer to IRONING TIPS latter.
5. After a few minutes, the temperature indicator will be
extinguished, it indicates the soleplate temperature has
achieved the selected temperature. If the indicator of
defaulted steam rate has been changed flashing to
illuminating, it indicates you can take out of the iron and
iron the garment with steam by pressing the steam control
button of the iron.