Temperature Adjustment; Steamless (Dry) Ironing - Fakir Viaggio User Manual

NOTE!:
Steam iron is designed for use with tap water, but if your water is very hard, it is
recommended to use purified water. The water reservoir must be drained after each
use.
NOTE!:
While assembling your product; you can realise that some water drop might be on the
water tank and the product body. This is caused by our quality tests which confirm
the 100 % workability of the product. The product did not be used before and it is
produced to give you many years of trouble-free service.

Temperature Adjustment:

Before ironing, always check the label with the ironing instructions on the product to
be ironed. In any case, follow these explanations. Turn the temperature adjusting knob
to set the appropriate temperature value indicated in the ironing instructions or on the
label of the fabric.
Tag Fabric Type
Do not iron this product
Synthetic, Nylon, Acrylics, Polyester, Artificial Silk
Wool, Silk
Cotton, Linen

Steamless (Dry) Ironing

Place the iron on a flat surface and plug it.
For dry ironing, turn off the steam slide by pulling it in the direction shown below. When
the appliance is in this position, steam will be blocked even if there is water in the water
tank.
Adjust the thermostat adjusting knob based on the type of fabric you want to iron.
The thermostat warning lamp will light up in red and indicate that the thermostat is
starting to warm up. When the thermostat warning light turns off, it means that you have
reached the temperature you have set.
19
EN