Paper Not Aligned With Right Guide; Cannot Detect Papr; Paper Cutting Failed - Canon imagePROGRAF iPF765 Basic Manual

Paper not aligned with right guide.

•
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the
Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may
Important
be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is
printed.
Paper not aligned with right guide. Paper not aligned with right guide.
When paper was loaded, it was not aligned with the guide on the right side.

Cannot detect papr

Cannot detect papr
Cause
The paper has come out of the printer.

Paper cutting failed.

Paper cutting failed.
Cause
There are sheets left on the
Ejection Guide.
116
Cause
Cause
Corrective Action
Follow these step to reload a sheet.
1.
Remove the paper and press the OK button.
2.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Follow these step to reload a sheet.
1.
Push the Release Lever back and remove the paper.
2.
Pull the Release Lever forward.
3.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
1.
Push the Release Lever back and remove the paper.
2.
Load the paper.
3.
Pull the Release Lever forward.
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Corrective Action
If this error recurs after you reload the roll, remove the Roll Holder
from the printer, push the roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.")
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Corrective Action
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
→P.18
→P.18
Corrective Action
iPF765
→P.9
→P.18
Basic Guide