Canon imagePROGRAF iPF765 Basic Manual page 62

Preparing to Transfer the Printer
5
Push all ink tank lock levers closed until they click into
place.
6
Close the Ink Tank Cover.
At this point, ink is drawn out from inside the tubes.
•
Do not remove the Maintenance Cartridge during this process.
Important
7
When the processing is complete, "Completed! Turn
Power Off!!" is displayed. Press the Power button to
turn the power off.
Pack the printer
1
Disconnect the power cord and interface cable.
•
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and transfer
it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this
Important
procedure again.
2
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
3
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
4
Disassemble and repackage the Stand by following the installation procedure in reverse.
5
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.
62
iPF765
Basic Guide