SECTION 5
Slide out securing slide lock (1) – figure (5.6).
The filter element and the filter body should be carefully cleaned and blown
through with compressed air. Assembly should be done in reverse order.
FIGURE 5.6
Air filter
(1) securing slide lock, (2) air filter cover
Cleaning the air filter (filters):
5.3.4
DRAINING WATER FROM AIR TANK
Scope of maintenance activities
Open out drain valve (1) placed in lower part of tank (2) – the tank is placed on
brackets of right longitudinal frame of lower frame.
Hold the filter cover (2) with the other hand. After removing slide lock,
the cover is pushed off by the spring located in the filter housing.
• every 3 months of use,
5.17
Pronar T663/1 T663/1 SILO