PRONAR T663/1 Operator's Manual page 126

Pronar T663/1 T663/1 SILO
• Surfaces smeared with oil or grease should be cleaned by application of benzene
or other degreasing agents and then washed with clean water with added
detergent. Comply with recommendations of the Manufacturer of cleaning agents.
DANGER
Carefully read the instructions for application of detergents and maintenance
preparations.
While washing with detergents wear appropriate protective clothing and goggles
protecting against splashing.
• Detergents should be kept in original containers, optionally in replacement
containers, but very clearly marked. Preparations may not be stored in food and
drink containers.
• Ensure cleanliness of elastic conduits and seals. The plastic from which these
elements are made may be susceptible to organic substances and some
detergents. As a result of long-term reaction of some substances, the ageing
process may be accelerated and risk of damage increased. Rubber elements
should be maintained with the aid of special preparations after previous thorough
washing.
• After completed washing wait until the trailer is dry and then grease all inspection
points according to recommendations. Remove excess oil or grease with a dry
cloth.
• Observe environmental protection principles and wash trailer in a place designed
for this purpose.
• Cleaning and drying of the trailer must take place at temperatures above 0
• After washing and drying, trailer should be greased at all control points regardless
of previous date of lubrication.
5.9 STORAGE
• Trailer should be kept in a closed or roofed building.
5.32
SECTION 5
o
C.