PRONAR T663/1 Operator's Manual page 118

Pronar T663/1 T663/1 SILO
Change of grease in hub bearings should be entrusted to specialised service points,
equipped with the appropriate tools. According to the recommendations of the axle
Manufacturer, dismantle the entire hub, remove the bearing and individual sealing rings. After
careful washing and inspection, mount lubricated elements. If necessary, bearing and seals
should be replaced with new parts. Lubrication of axle bearings shall be performed at least
once in 2 years or every 50,000 km. In the event of intensive use, lubrication should be
performed more frequently.
Empty grease or oil containers should be disposed of according to the recommendations of
the lubricant Manufacturer.
TABLE 5.4 Trailer lubrication schedule
ITEM
1 Hub bearing
2 Drawbar eye
3 Expander shaft sleeve
4 Sockets of tipping cylinder and cylinder suspension
5 Tipping cylinder ball bearing
6 Parking brake mechanism
7 Parking brake guide roller pins
Articulated joints and sockets for installation of load
8
box.
9 Wall extension lugs
LUBRICATION POINT
(2)
10 (16)
5.24
SECTION 5
4 A 24M
1 B 14D
4 A 3M
4 B 1M
1 B 3M
1 A 6M
2 A 6M
4 B 2M
(1)
A 1M