Perform Initial Settings For The Camera - Canon VB-C50FSi User Manual

3. Perform Initial Settings for the Camera

Once your PC and the camera are connected, perform the initial settings next. The instructions
here follow on from "2. Connect the Camera to the Network", where one camera is connected to
a PC as an example.
Installation Example
1. Turn on the network device (in this case, the hub) and then your PC.
● Do not turn on the camera at this stage.
● If you are using a PoE hub or midspan with the VB-C50FSi, do not connect the
Note
LAN cable.
2. Insert the CD-ROM provided into your PC and from Explorer etc. double-click
"VBSetup.exe" to start the VB Initial Setup Tool. Turn on the VB-C50FSi/VB-
C50Fi. If you are using a PoE hub or midspan, connect the LAN cable.
2-8
VB-C50FSi
LAN cable
Hub
Supplied CD-ROM
○ ○ ○ ○ ○ ○ ○ ○ ○
Continued on the following page. a