Canon VB-C50FSi User Manual page 216

Log Messages
●B011 Audio client connected (info)
Message
%1
%2
%3
Explanation
●B012 Audio client disconnected (info)
Message
%1
%2
%3
Explanation
●B101 Received unusual request (notice)
Message
%1
%2
Explanation
●B102 Client connection denied (notice)
Message
%1
%2
Explanation
Response
7-8
[%1] %2 connected n=%3
Client type (send | recv)
Client host IP address
Total number of clients
The audio client has connected.
[%1] %2 closed [%3]
Client type (send | recv)
Client host IP address
Disconnection type (active | passive | timeout | senderr)
Disconnection with the audio client.
%1 unusual request[%2]
Client host IP address
Abnormality type (400 | 404 | ...)
Request denied by command error (400) or parameter error (404).
%1 request denied[%2]
Client host IP address
Denial type (41 | 42 | ...)
Client connection denied by authentication error (41), timeout (42), lack of
resources (43), audio file error (44), non-corresponding codec specification
(45) non-corresponding stream specification (46), user level restriction
(47), host restriction (48), client number restriction (49), operating mode
(4a) and file number (50).
41: Check user name and password at connection or user list. 42: Check
the service time. 43: Reconnect or restart. 44: Check audio file registration
45 to 47: Use corresponding client software. 48: Check the host access
restriction setting. 49: Check the maximum number of clients setting. 4a:
Check that the Use Audio Server setting is enabled. 50: Check the
specified file number.